Skip to main content

Backup Strategy

3-2-1 Backup Setup

In this example, we are backing up a ZFS pool RAID 1 consisting of two 2TB Samsung 990 EVO PRO SSDs.

The goal is to implement the 3-2-1 backup strategy: three copies of your data on two different media, with one copy offsite. This setup is designed for a homelab using consumer software, which adds some challenges due to the lack of enterprise-level scalability. Here's how to do it.

Step 1: Install Proxmox Backup Server (PBS) with Drive Passthrough

First, install PBS with my drive passthrough script. This passthrough drive will be our first backup. Note that while this setup is fine for a homelab, there is a risk in having the backup drive on the host machine that you should be aware of.

Installation Steps:

  1. Access Administration:    - Go to the browser and navigate to Administration > Repositories.    - Add or remove appropriate free and enterprise repositories as necessary.

  2. Update and Reboot:    - Open the shell and run:      bash      apt update      apt upgrade          - Reboot the system if a kernel update is applied.

  3. Prepare the Backup Drive:    - Go to Administration > Storage > Disks and wipe the disk you intend to use.    - Then, either create a directory or a ZFS filesystem on this drive.

  4. Add PBS to Proxmox:    - Go back to the dashboard and copy the fingerprint of the PBS instance.    - Ensure the "Add as datastore" option is checked and note the datastore name you select.

  5. Configure Proxmox:    - In Proxmox, go to Datacenter > Storage > Add > Proxmox Backup Server.    - Set the following values:      - ID: Choose a unique identifier.      - Server: IP address of the PBS instance.      - Username: root@pam or the appropriate user.      - Password: Password set in PBS.      - Datastore: Name you noted earlier.      - Fingerprint: Paste the fingerprint you copied.

Now, you can run your backup.

Step 2: Set Up Samba File Share

Since we need to spin up a Windows VM (because Rclone doesn't work well with Proton Drive and Proton Drive only supports NTFS), we'll set up a Samba file share.

Installation and Configuration:

  1. Install Samba:    bash    apt install samba    

  2. Configure Samba:    - Edit the Samba configuration file:      bash      nano /etc/samba/smb.conf          - Add a share definition at the end of the file, assuming you want to share the /mnt/new-storage directory (corresponding to the passed-through drive):      plaintext      [SharedDrive]      path = /mnt/new-storage      browseable = yes      read only = no      guest ok = yes      force user = root            - path: Directory you want to share.      - browseable: Allows the share to be visible when browsing network shares.      - read only: Set to no to allow writing to the share.      - guest ok: Set to yes to allow access without a password (optional).      - force user: Ensures files are accessible to all users via Samba.

  3. Set Permissions:    - Ensure that the directory you're sharing has the correct permissions:      bash      chmod -R 0777 /mnt/new-storage            This makes the directory readable and writable by all users. Adjust permissions as necessary depending on your security requirements.

  4. Restart Samba Service:    - Apply the changes by restarting the Samba service:      bash      systemctl restart smbd      

Step 3: Access the Share from Windows

  1. Access the Share:    - Open File Explorer on your Windows PC.    - In the address bar, type \Proxmox-IP-Address\SharedDrive and press Enter.      - Replace Proxmox-IP-Address with the IP address of your Proxmox server, and SharedDrive with the name of your share as defined in the smb.conf file.    - Authenticate if prompted. If guest access is allowed, it might not ask for credentials; otherwise, use a valid username and password from the Proxmox server.

  2. Map the Network Drive Permanently (Optional):    - Right-click on "This PC" in File Explorer and select "Map network drive...".    - Choose a drive letter and enter the path to your Proxmox share (e.g., \Proxmox-IP-Address\SharedDrive).    - Check "Reconnect at sign-in" and click "Finish".

Step 4: Secure Samba Share with a Password (Optional)

If you want to secure your Samba share with a password, follow these steps:

  1. Create a Samba User:    - Add a Linux user if it doesn't already exist:      bash      adduser yourusername          - Add the user to Samba:      bash      smbpasswd -a yourusername      

  2. Modify Samba Configuration:    - Edit the Samba configuration file:      bash      nano /etc/samba/smb.conf          - Modify the share definition to require authentication:      plaintext      [SharedDrive]      path = /mnt/new-storage      browseable = yes      read only = no      valid users = yourusername      force user = root      

  3. Restart Samba Service:    - Apply the changes by restarting the Samba service:      bash      systemctl restart smbd      

  4. Access the Share from Windows:    - When prompted, enter the username (yourusername) and the password set with smbpasswd.

By following these steps, you can share the passed-through drive on your Proxmox server with a Windows PC, allowing it to be accessed and used from both systems.

Back to top